Epson 440 - Manual (Page 54)

3. If your printer is connected to the Macintosh’s printer port
and you are not using an AppleTalk network, make
AppleTalk inactive by clicking the Inactive radio button.
You may also need to restart your Macintosh to make
AppleTalk inactive.
You do not need to make AppleTalk inactive if the printer is
connected to the modem port.
c
Caution:
Do not make AppleTalk inactive if the Macintosh is
connected to an AppleTalk network. See “Using the
AppleTalk connection” on page 2-30 for details.
4. Click the Background Printing radio buttons to turn
background printing on or off.
When background printing is on, you can use your
Macintosh while it is preparing a document for printing.
You must turn on background printing to use the
EPSON Monitor2 utility to manage print jobs. For more
information, see “Using the EPSON Monitor2 Utility” in
Chapter 6.
5. Close the Chooser.
Your Macintosh will check that the printer is connected
correctly. If the message below appears, follow the instructions
on the screen, click OK, and repeat the steps above.
picture5
L
Easter2 Ref. Guide
Rev.b
A5 size Chapter 2
05-28-97 DR, pass 3
2-30 Getting Started