Kichler 350101 - Manual (Page 4)

4. INSTALLING THE LAMPS & GLASS
SHADES
3
Fig. 3
Glass shade
Lamps
Glass shade retainer nut
1. Remove the glass shade retainer nut from
each socket. Insert a glass shade (not include)
into the glass holder, then replace and tighten
the retainer nut until it is tighten firmly. Repeat
this procedure for the remaining glass shades.
(Fig. 3)
NOTE: A Socket Nut Wrench has been
provided to help in this installation.
2. Install 3, 60 Watt E-12 candelabra lamps
(included). (Fig. 3)
3. Attach a pull chain fob to the beaded pull
chains on light fixture.
4. Your installation is now complete. Restore
electrical power and enjoy your new ceiling fan
light fixture.
Socket nut wrench
Light fixture
assembly