Eaton Electrical V3 - Manual (Page 47)

www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 46/65
7.8 Additional information on events and actions
7.8.1 Action settings Tab
In the Action settings tab you can configure the actions that are executed by the Network Shutdown Module.
Action settings tab
Select an action in the Action List (eg. User Notification) then you have the possibility to select the different
tabs for the considered action:
z
In the “Settings” tab , you can configure the selected action that is executed by the Network Shutdown
Module.
z
In the "Events" tab , you can associate the selected action with the event(s) that will be able to trigger the
action.
z
In the "Test" tab , you can execute the action (by simulating the event occurrence).
z
The Restore to default button takes you back to the initial configuration.
z
The Save Change(s) button saves your configuration.
Possible operations on actions
z
Add ... : Adds a new action in the Action list, all the parameters must be entered
z
Duplic.: Duplicates the selected action, with all its parameters (see Add ...)
z
Del: Deletes the selected action
7.8.1.1 The different actions
There are several actions classified into two categories:
z
Standard actions
By default, Network Shutdown Module only uses these actions to ensure the machine's protection and to
inform users.