Eaton Electrical V3 - Manual (Page 60)

www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 59/65
In the page “Configuration -> Power Device”, when I click on the “Add” button the expected page is not
displayed
Solution: Check if an anti popup filter is activated on your web browser and configure this filter to accept
the page.
Check you don’t have the highest security level on IE
Cannot display the UPS properties page. HTTP 404 error with IE.
Solution: Check the URL entered.
> https://< name or IP address of computer hosting NSM>:4680/
> or http://< name or IP address of computer hosting NSM>:4679/
When you attempt to view the properties or configuration pages, the browser requests a user name and
password.
Solution: The system administrator has protected access to the pages. You must request a user name
and password from your administrator.
No UPS information is available.
Solution:
Check that communication between the UPS and the computer is OK.
Check also that following requirement is met
Port 80 must be opened as a destination port (for output) on the machine hosting Network Shutdown
Module.