Locate your cable box – Epson Bocs User Manual
Page 11
Installing the SuperCombiner
11
Parts Needed
SuperCombiner
Cable Finder Tool
Short COAX Cable
room name in your cable splitter box. If not, we provide a tool in the installation kit
so you can find the right wire.
To find the right wire, we apply power to that coax wire so that an indicator light on
the other end can identify when the correct wire is found.
At the closest coax wire jack to the desired Xtender location, and unplug any cable
attached to it.
You are looking for the adapter that looks like this – it
comes with the optional installation kit.
Now, plug the power adapter that
came with your Xtender into the
cable finder adapter, and plug the
adapter into the wall outlet with a
piece of coax – you should now
have something that looks like
this…
Warning –
do not plug the coax adapter into a satellite TV outlet or you may
damage your satellite TV system!!
Locate your cable box
This is usually found in the basement, garage or on the outside of your home and
will most likely look like one of the photos below:
Note that you might have both a telephone and a Cable-TV box and they
sometimes look alike.