Epson Bocs - Manual (Page 26)

Programming the Remotes 26
ƒ "DVD" and "Delete/*" for the local DVD device,
ƒ "AUX" and "Delete/*" for the local AUX device,
ƒ "RED" and "Delete/*" for the BOCS RED channel,
ƒ "GREEN" and "Delete/*" for the BOCS GREEN channel, or
ƒ "BLUE" and "Delete/*" for the BOCS BLUE channel.
2. The power LED will turn on.
3. Press the button to be unlearned.
4. The power LED flashes twice if the key was successfully unlearned, or flashes
rapidly if unlearning failed.
5. To unlearn another button, go back to step 3.
6. When you are done with all the buttons to be unlearned for this device, just do
nothing. The remote will exit unlearn mode after 10 seconds of inactivity, and
the power LED will turn off.
Channel Tuning Delay
Important when the Red, Green, or Blue button is pressed, the remote control attempts to
tune the TV channel. Some TVs require longer delays between channel digits
transmitted by the remote. Follow this procedure to set longer delays if your TV is
having trouble tuning to the correct channel number for Red, Green, or Blue
channel.
1. Press and hold TV and CH+ for at least two seconds – until the power light on
the remote stays on
2. Press a number button corresponding to the desired channel tuning delay:
1 sets delay to 1/10
th
of a second
2 sets delay to 1/5
th
of a second (default factory setting)
3 sets delay to 1/2 th of a second
4 sets delay to 3/4 of a second
5 sets delay to 1 second
6 sets delay to 2 seconds
3. If a valid value was entered, the red power light on the remote will flash twice
indicating success.
4. If the value entered is not recognized, the red power light on the remote will
blink rapidly, in this case repeat the programming procedure.
Channel Tuning Mode (2 or 3 digits or use the +100 key)
Important When you press one of the red, green, or blue BOCS buttons, the remote sends
two or more IR digits to the local TV to tune it to the channel for the red, green, or
blue device. Some TVs require different digit sequences to tune correctly,
especially for channels above 99. Use this function to set the method your TV
requires.
1. Press and hold "MENU" & "5" for at least 2 seconds. The power LED will light.
2. Press "1" or "2" to select the tuning mode: