Epson Bocs - Manual (Page 24)

Programming the Remotes 24
ƒ "TV" and "Live TV" - to restore the TV-Input button to its default
behavior.
2. The power LED will turn on.
3. Press Select/OK to confirm.
4. If successful, the power LED will pulse twice and turn off. If the function failed,
the power LED will pulse rapidly for one second, and then turn off.
Channel Punch-Through:
By default, the remote sends channel tuning buttons to the Local TV device when
in local TV Mode. To redirect channel tuning buttons (digits "0" - "9", "CH +", "CH -
", "#/Enter", and "*/Delete" to the CBL device when in local TV mode, or to return
these controls to the local TV, use this procedure:
1. Press and hold one of the following combinations for at least 2 seconds:
ƒ "CBL" and "CH +" - to direct channel tuning buttons to the CBL
device, or
ƒ "TV" and "CH +" - to restore channel tuning buttons to the TV.
2. The power LED will turn on.
3. Press Select/OK to confirm.
4. If successful, the power LED will pulse twice and turn off. If the function failed,
the power LED will pulse rapidly for one second, and then turn off.
Learn IR Code(s)
Learning allows the BOCS remote or the Xtender to output IR codes that are
identical to those output by another remote. Note that all Xtenders can learn IR
codes to control devices plugged directly into them, but to learn IR codes for a TV
or other “local device” you must purchase separately Learning remote.
• Learning associates a learned IR code with a specific button on the BOCS
remote for a specific device. For example, if you learn the "Menu" button for
the CBL device, the remote will output that code when you press "Menu" and
the remote is in CBL mode.
• Learning a button for a device overrides the IR code that the remote would
output for that device based on the device type set by the "Scan Local Device
Type or BOCS Device Type" or "Set Local Device Type or BOCS Device Type"
procedures. This makes it possible to first set a device type that is "close", and
then learn only the buttons that do not work as desired.
Note the "Scan Local
Device Type or BOCS Device Type" and "Set Local Device Type or BOCS
Device Type" procedures erase any learned IR codes for the device whose type
is set.
Have the BOCS Remote Learn IR Codes from Another Remote
To control the Local TV, CBL, DVD, or AUX devices, follow this procedure:
1. Place the two remotes pointing at each other, about 2" apart and directly
"nose-to-nose" in line with each other. Note that remotes must remain very still
during this process.