Extron electronic MAV Plus - Manual (Page 134)

HTML Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation 6-10
PRELIMINAR
Y
Email address fi elds
The eight Email address fi elds identify the e-mail addresses of the personnel to
whom the matrix switcher BME 0 e-mails notifi cation of its failure and repair status.
Standard e-mail address conventions (nnnnn@xxx.com) apply.
The check boxes and drop boxes associated with each address fi eld permit the
operator to assign specifi c criteria under which the BME will e-mail recipients. In
the associated Missing Input drop boxes, select the inputs to monitor for presence
or absence of a signal. Check the Fans and Power boxes to monitor the cooling
and power supplies. In the associated E-Mail Options drop box, select whether
the recipient is to be e-mailed of failures, fi xes, both, not notifi ed, or to be removed
from the e-mail list. The Suspend option is useful for temporarily removing
personnel from the e-mail list when they are unavailable, such as on travel or
vacation. Deleting an e-mail addressee and clicking the submit button removes the
recipient from e-mail notifi cation completely.
Firmware Upgrade page
The Firmware Upgrade page provides a way to replace the fi rmware that is coded
on the switcher BME 0’s control board without taking the switcher out of service,
opening the switcher enclosure, and replacing the fi rmware chip. Access the
Firmware Upgrade page (fi gure 6-8) by clicking the Firmware Upgrade link on the
System Confi guration page.
Select Email Settings
Refresh
Select System Configuration
Select Passwords
Figure 6-8 — Firmware Upgrade page