Extron electronic MAV Plus - Manual (Page 41)

3-11 CrossPoint 450 Plus and MAV Plus Switchers • Operation
PRELIMINAR
Y
3. Press and release the input 5 button (fi gure 3-6).
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9 I
N
P
U
T
S
I
N
Press and release the Input 5 button.
The button lights amber to indicate that RGBHV
and audio outputs can be tied to this input.
Figure 3-6 — Select an input
4. Press and release the output 3, output 4, and output 8 buttons (fi gure 3-7).
N The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc button fl ashes green once.
C O N T R O L
PRESET ENTER
= Blinking button
ESC VIEW
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
O
U
T
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected RGBHV or video and audio
input will be tied to these outputs.
The Enter button blinks
green to indicate the need to
confirm the change.
Figure 3-7 — Select the outputs
5. Press and release the Enter button (fi gure 3-8).
ENTER All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.
Figure 3-8 — Press the Enter button
The current confi guration (fi gure 3-9) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Video
Audio
Figure 3-9 — Example 1, fi nal confi guration