Preliminar y – Extron electronic MAV Plus User Manual
Page 61
3-31
CrossPoint 450 Plus and MAV Plus Switchers • Operation
PRELIMINAR
Y
4.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(fi gure 3-50) for approximately 2 seconds until the buttons begin to blink. The
output 3 and output 4 video and audio signals are muted.
3
4
3
4
Press and hold the Output 3 button.
The button blinks amber to indicate that
the RGBHV and audio outputs are muted.
Press and hold the Output 4 button.
The button blinks amber to indicate that
the RGBHV and audio outputs are muted.
Mute outputs one at a time.
= Blinking button
2 seconds
2 seconds
Figure 3-50 — Mute the outputs
N If both RGBHV/video and audio are selected, the mute action toggles both the
video and audio outputs. If either the video output or the audio output is already
muted, the unmuted output is muted and the muted output is unmuted.
N If both RGBHV/video and audio are selected and only video is muted, the output
button fl ashes between green and amber. If only audio is selected, the output
button fl ashes between red and amber.
5.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(fi gure 3-51) for approximately 2 seconds until the buttons lights steadily.
The output 3 and output 4 video and audio signals are unmuted.
3
4
3
4
Press and hold the Output 3 button.
The button lights amber to indicate that
the RGBHV and audio outputs are not muted.
Press and hold the Output 4 button.
The button lights amber to indicate that
the RGBHV and audio outputs are not muted.
Mute outputs one at a time.
= Blinking button
2 seconds
2 seconds
Figure 3-51 — Unmute the outputs
N If both RGBHV/video and audio are selected, the unmute action toggles both the
video and audio outputs. If either the video output or the audio output is already
unmuted, the muted output is unmuted and the unmuted output is muted.