Extron electronic MAV Plus - Manual (Page 21)

2-3 CrossPoint 450 Plus and MAV Plus Switchers • Installation
PRELIMINAR
Y
C
12
8
9
10
6
4
5
7
Figure 2-2 — MAV Plus 6464 Stereo Audio BME
Video or sync input and output (video and sync BMEs)
N The switchers do not alter the input video or sync signal in any way. The signal
output by the BME is in the same format as the input.
The switcher can connect to up to as many as 64 video sources, depending on the
model. The switcher can output to as many as 64 video devices, depending on the
model.
N Each video plane (such as red, green, or blue) or sync plane (such as horizontal
sync and vertical sync) requires its own BME of the appropriate type:
Red, green, and blue video planes — Connect these planes to
CrossPoint 450 Plus Wideband video BMEs.
Horizontal sync, vertical sync, and composite sync — Connect these planes
to CrossPoint 450 Plus Sync BMEs.
Y, R-Y, B-Y [component video], Y, C [S-video], or video [composite video] —
Connect these planes to MAV Plus Low Resolution video BMEs.
a
Video or sync inputs — Connect a single plane of video or sync, as
appropriate to the BME type, to these BNC connectors for each input.
b
Video or sync outputs — Connect a single plane of video or sync, as
appropriate to the BME type to these BNC connectors for each output.