Extron electronic MAV Plus - Manual (Page 58)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-28
PRELIMINAR
Y
Example 8: Recalling a preset
In the following example, a preset is recalled to become the current confi guration.
The steps show the front panel indications that result from your action.
1. Press and release the Esc button (fi gure 3-44).
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-44 — Clear all selections
2. Press and release the Preset button (fi gure 3-45).
PRESET
17 18 19
1 2 3
I
N
Press and release the Preset button.
The Preset button lights.
All input buttons with
assigned presets light red.
Red
(Preset Assigned)
Unlit
(No Preset Assigned)
Figure 3-45 — Enter Recall Preset mode
3. Press and release the input or output button for the desired preset
(fi gure 3-46).
C O N T R O L
PRESET ENTER ESC VIEW
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
= Blinking button
Figure 3-46 — Select the preset