Equator MD3720CEE - Manual (Page 23)

23
12) Fan Motor (50732)
Replacement Procedure:
▪
Unplug the unit.
▪
Remove the top panel (Two screws behind and slide back)
▪
The fan motor is mounted on the heater housing.
▪
Unfix the support to the hater housing. (4 bolts on the top)
▪
Unfix the upper heater housing. (3 screws and a few clamps)
▪
The blower / fan is mounted on the shaft of the fan motor with the help of a nut
▪
Unfix the nut (rotate it clockwise) and remove the blower.
▪
Unfix the fan motor (4 screws on top).
▪
Replace the same and do the wiring as before / below.
▪
Fix all the parts back by following the reverse procedure.
Wiring: Fan Motor
MV
TF