Equator MD3720CEE - Manual (Page 24)

24
13) Blower / Fan / Impeller Assembly (51733)
Replacement Procedure:
▪
Unplug the unit.
▪
Remove the top panel (Two screws behind and slide back)
▪
Unfix the support to the hater housing. (4 bolts on the top)
▪
Unfix the upper heater housing. (3 screws and a few clamps)
▪
The blower / fan is mounted on the shaft of the fan motor with the help of a nut
▪
Unfix the nut (rotate it clockwise) and remove the blower.
▪
Replace the same.
▪
Fix all the parts back by following the reverse procedure.
Blower / Fan / Impeller assembly
Nut