Precision Digital PD8-765 - Manual (Page 22)

PD8 Series Explosion-Proof Instrument Supplemental Manual
22
Figure 8: RS-485 Wiring
Notes:
1. Termination resistors are optional and values depend on the cable length
and characteristic impedance. Consult the cable manufacturer for recom-
mendations.
2. Refer to RS-232 to RS-485 Converter documentation for further details.
3. Use shielded cable, twisted-pairs plus ground. Connect ground shield only
at one location.
WARNING
Observe all safety regulations. Electrical wiring should be
performed in accordance with all agency requirements and
applicable national, state, and local codes to prevent damage to
the meter and ensure personnel safety.