Disc playback, Inserting and playing a disc, The display window during playback – Epson 25 User Manual
Page 12
12
1
Press
to open the disc tray.
A beep sounds and the power comes on.
You can also press
on the remote control.
2
Place the disc in the disc tray with the label
facing up.
3
Press
to close the disc tray.
For all discs except
, the projection lamp
comes on automatically, and projection begins. It
takes a few seconds for the lamp to warm up and
project at full brightness.
To play
, press
to start audio play-
back. The projection lamp does not turn on.
You can also press
on the remote control.
Disc Playback
When a menu is displayed:
When using in high altitude areas (above 4,900
feet), set the “High Altitute Mode” to “On.” See
page 51 for instructions.
Inserting and playing a disc
The display window during
playback
When playing
When playing
When playing
When playing
When playing
Display window
Chapter number
Elapsed playback
time
Track number
Track number
Elapsed playback
time
Track number
Elapsed playback
time
File number
Group number