Solving problems, When the or indicators are off normal – Epson 25 User Manual

Page 54

Advertising

If MovieMate is not functioning normally, check the following notes before requesting repairs. If MovieMate fails to

improve, contact Epson as described on page 56.

When the

indicators are off

Normal

: lit

: flashing

: off

Standing by

MovieMate is ready to be used.

Warming up
(about 20 seconds)

In warm-up mode, pressing

has no effect.

Do not turn off the power or unplug the cable during warm-up, as this
may reduce the lifespan of the lamp.

Projection in
Progress

Cooling down
(about 9 seconds)

The operation of all remote control and MovieMate buttons is sus-
pended during cool-down.
MovieMate enters standby mode once cool-down has completed.
Do not turn off the power or unplug the cable during cool-down, as this
may reduce the lifespan of the lamp.

Break

Press

to return to normal playback.

When this happens . . .

Check the following:

Reference
page

Power does not turn on

Is the main power switch in the on position?

page 11

Disconnect and reconnect the power cable.

page 11

Is MovieMate cooling down?

page 54

If the indicator goes on and off when you touch the power cable, turn
off the main power switch, then disconnect and reconnect the power
cable. If MovieMate fails to improve, it is possible that the power cable
has been damaged. Stop using MovieMate, disconnect the power cable
from the electrical outlet, and contact Epson.

page 56

No images appear

Is the Image Off indicator lit orange?

page 22

You cannot play DVD videos if the disc region code does not
correspond to the region code label on the side of this unit.

Press

to switch to DVD.

page 37

Is the lamp burned out?

page 53

Images are fuzzy or out of
focus

Has the focus been adjusted?