Changing from progressive to interlaced mode, Locking the tray – Epson 25 User Manual
Page 35
35
Adv
anced O
per
ations
For the best image quality, MovieMate uses the Progressive video display
mode. You can change to the Interlaced mode if necessary.
When there is no disc loaded in the disc tray (or when a video is
stopped), press
.
Whenever you press
the display window display changes in the fol-
lowing way.
You can lock the disc tray so that children cannot interfere with it.
With the power turned on press and hold
on the MovieMate
control panel, then press
.
• “LOCKED” appears in the display window, and the disc tray is locked.
• To cancel the disc lock, follow the same procedure. “UNLOCKED”
appears in the display window.
Changing from Progressive to Interlaced mode
Make sure the switch is set to the
[Function] position.
All scan lines are displayed in one video
field. This achieves a far superior image
than interlacing.
Traditional video system. A single screen
is made up of two video fields comprising
the odd number of scan lines and the
even number of scan lines, displayed
alternately.
Locking the tray