Epson 25 - Manual (Page 24)

24
During playback, select the chapter or track number you wish to
play by pressing the numeric buttons.
For details on using the numeric buttons, see page 19.
You can play a disc from a specified time position. Depending on the disc, the
start point position varies as follows.
Time elapsed from the start of the title
When executing from stopped: Time elapsed from
the start of the disc
When executing during playback: Elapsed time from the start of the current
track being played
1
Press twice during playback or when stopped.
The following menu bar is projected.
•
This function can only be used during playback.
•
Cannot be used when playing back using the PBC
function.
2
Press until the pointer reaches .
3
Press .
4
Enter the time using the numeric buttons.
•
Specify the start position in hours/minutes/seconds. You can
leave out the minutes/seconds if desired.
•
Specify the start position in minutes/sec-
onds.
•
Can be used when stopped or when playing back
with PBC off.
•
Can also be used when stopped.
• Depending on the disc, certain operations may not be possible.
Selecting the chapter or track number
Playing from a designated time (time search)
Make sure the switch is set to the
[Function] position.
Status bar
Menu bar