Epson 25 - Manual (Page 67)

67
•
Make sure the lens cover is securely in place.
•
Remove any discs and close the disc tray.
•
Hold the projector as shown in the following
illustration.
Be careful not to damage the mesh covering the
speakers. Lift the unit as shown:
•
Many glass and precision parts are used within
this unit. In order to prevent impact during trans-
portation, re-use the box and protective packag-
ing you received at the time of purchase.
If you no longer have the original packing, pro-
tect the outside of this unit with shock absorbing
material to protect it from impact, place it inside
a stong box and make sure it is clearly labeled
for the transportation of precision equipment.
•
Take off the lense cap and wrap it.
•
If using a courier service for transportation,
inform them that this unit contains precision
equipment and should be handled accordingly.
* Your warranty does not cover any damages that may
occur to this product during transportation.
•
This unit is equipped with Macrovision copy pro-
tection.The intellectual property rights to the
patent of this copy protection technology are
owned by the Macrovision Company of America,
and others. When employing this technology, a
license is required from the Macrovision com-
pany. The Macrovision company does not
authorise the use of this technology except for a
limited range of intended purposes, including
home use. Further, remodeling, disassembly,
and reverse engineering are prohibited.
•
Reproduction of a disc for the purposes of
broadcast, projection in public, public musical
performance, or rental (regardless of compen-
sation, remuneration, or lack thereof) without the
permission of the copyright owner, is strictly
prohibited.
When moving this unit
Transportation cautions
Copyright