Epson 25 - Manual (Page 34)

34
Auto standby: When playback has finished or has been stopped, or an opera-
tion has not been performed for about 3 minutes, the power switches off auto-
matically.
Sleep timer: Once the set time has elapsed, the power switches off automati-
cally. This prevents unneccesary power being consumed if you fall asleep
while watching a movie.
You cannot use auto standby and sleep timer at the same time.
Press .
• Each time you press
, the display window changes as follows.
Press repeatedly until the desired item is displayed.
• If you select something other than “A. STBY ON,” auto standby is
cancelled.
Setting auto stand-by
“A. STBY” flashes approximately 20 seconds before the power switches off.
Changing the sleep timer
Press repeatedly and select the new time.
Checking the sleep timer setting
Once the sleep timer has been set, press once to view the setting in the dis-
play window.
Canceling the sleep timer
Do either of the following:
Press .
Press repeatedly until “SLEEP OFF” is displayed in the display window.
• Sleep timer settings are not saved. If the power is switched off, the sleep
timer is canceled.
• In external video mode, video is switched off automatically if no signal
is input and no operations are performed for 30 minutes. This function is
performed regardless of the sleep timer settings.
• Auto standby cannot be used in external video mode.
• Auto standby does not work with discs that return to the menu once
playback has completed.
Selecting Auto-standby and Sleep timer settings
Make sure the switch is set to the
[Function] position
Auto standby is activated.
After 10 minutes have elapsed, the power
switches off.
After 150 minutes have elapsed, the power
switches off.
Sleep timer is cancelled.