Rose Electronics MultiStation - Manual (Page 16)

INSTALLATION
10 MULTISTATION INSTALLATION AND OPERATIONS MANUAL
Installation procedure
Step 1. Connecting the keyboards, monitors, and mice
The Keyboard-Video-Mouse adapter cable connects one keyboard, one video
monitor, and one mouse to the MultiStation. Cables will vary depending upon
the connector type on your keyboard and whether you are using a PS/2 or
serial mouse. You should have the correct cable to match your equipment’s
connectors. These cables are available where you purchased your
MultiStation.
1.1 Connect the KVM adapter cable’s DB-25M connector to the
DB-25F connector labeled “KVM1” on the MultiStation front panel.
1.2 Connect the keyboard, mouse, and monitor cables to the corresponding
connectors on the KVM adapter cable.
1.3 Repeat 1.1 and 1.2 for other KVM station(s)
Figure 7. Connecting the KVM
MLK-2U
Receiver
ML-4U
ML-2U