Rose Electronics MultiStation - Manual (Page 21)

MULTISTATION INSTALLATION AND OPERATIONS MANUAL 15
Keyboard Command Summary
Table 8 is a summary of the available keyboard commands. See the detailed
descriptions for an expanded explanation of each command. [Ctrl] in the Key
Sequence column is a press and release of the right control key followed by
the command.
Command Key Sequence Description
Reset [Ctrl] R Resets and enables
keyboard and mouse on
currently connected port
Rom Version [Ctrl] I Identifies ROM version,
computer must be at some
sort of command prompt to
receive data
Keep [Ctrl] K Saves custom settings
Send Null to mouse [Ctrl] N Re-sync an out-of-sync
PS/2 mouse
Enable [Ctrl} E Enable keyboard, monitor,
and mouse at other KVM
stations.
Disable [Ctrl] D Disable keyboard, monitor,
and mouse at other KVMs
Freeze [Ctrl] F Disable only keyboard and
mouse at the other KVM
stations, not video.
Keyboard mode [Ctrl] M x [Enter]
x = 1, 2, or 3 Sets keyboard mode to
mode 1, 2, or 3.
Typematic Value [Ctrl] A xxx
xxx = 0 to 127 Sets keyboard Typematic
action. (See Table 9)
RS232 Mouse Type [Ctrl] Q x [Enter]
x = 0, 1, or 2 Translates the KVM mouse
type to match the computer
mouse type.
0 = Auto detect
1 = PS/2 computer
2 = Serial computer
(See detailed description)
Keyboard timeout [Ctrl] H xxx
xxx = 0 to 255 sec. Sets time computer
becomes accessible from
another KVM station
Screen blanking time [Ctrl] V xxx [Enter]
xxx = 0to 999 sec.
Sets time screen blanks with
no keyboard/mouse activity
Table 8. Keyboard Commands