Rose Electronics MultiStation - Manual (Page 17)

MULTISTATION INSTALLATION AND OPERATIONS MANUAL 11
Step 2. Connecting the computer
A CPU adapter cable connects your computer to the MultiStation. The cable
type will vary depending on the computer’s keyboard and mouse connectors.
2.1 Connect the CPU adapter cable’s DB-25M connector to the DB-25F
connector labeled CPU on the MultiStation front panel.
2.2 Connect the keyboard, mouse, and monitor connectors on the CPU
adapter cable to the corresponding ports on the computer.
Figure 8. Connecting the Computer
MLK-2U
Transmitter
ML-4U
ML-2U