Rose Electronics MultiStation - Manual (Page 18)

12 MULTISTATION INSTALLATION AND OPERATIONS MANUAL
Step 3. Connecting the bus cable (model MLK-2U only)
Step #3 applies to MultiStation model MLK-2U only. If your model is model
ML-2U or ML-4U, skip this step. The bus cable (13W3M / 13W3M) connects
between the local MultiStation and the remote unit.
3.1 Connect one end of the bus cable to the local unit’s “BUS OUT” 13W3F
connector.
3.2 Connect the other end of the bus cable to the remote unit’s “BUS IN”
13W3F connector.
Figure 9. Connecting Bus Cable
WARNING: Avoid routing all cables near fluorescent lights, air
conditioning compressors, or machinery that may
create electrical interference.
For the best quality video, use coax cable when the
cable length exceeds 20 feet.