Rose Electronics UltraMatrix AV VGA 8 - Manual (Page 14)

10 UltraMatrix AV Installation and Operations Manual
Macro’s
The UltraMatrix AV can save custom routing schemes as macros. Up to 50 different macros can be created and saved
for use at anytime with a single click.
Figure 8. Macros
To create a macro, click on the Record tab. A dialog box will display showing two choices, “Manual Save” or “Save
Status”. If you already have a video routing scheme laid out and want to save it as a macro, click on “Save Status” tab
and follow the on-screen instructions. If you are designing a routing scheme and want to record and save the scheme
as a macro, click on the “Manual Save” tab. A blinking “Recording” message will display indicating that all routing
selections are being recorded. When the assignment is complete, click on a Macro tab on the right and save the macro
to that macro position.
The RoseControl matrix can be customized to conform to your system set-up. If your system has 12 video sources and
these will be displayed on 6 monitors, the matrix can be customized to be a 12 x 6 matrix. Select the Router Type
AV-16x16, change the Inputs to 12 and the Outputs to 6 and click on OK. The RoseControl matrix will automatically
adjust to a 12 x 6 matrix as shown.