TA Triumph-Adler CLP 4416 - Manual (Page 132)

6-16
Maintenance
Caution - Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit has
cooled before cleaning the interior of the printer.
S
ERVICING
For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit and
the transfer roll) has to be done on the printer. Please contact your supplier for this operation.
S
CANNER CALIBRATION
You can perform this operation when the quality of photocopied documents is no longer satisfactory.

80 OK - ADVANCED FCT / CALIBRATION
+
Confirm your choice by pressing the OK key.
I
NCIDENTS
C
OMMUNICATION ERRORS
If the communication fails, the fax advises you of an automatic retry later.
Example of what is displayed:
Transmission from the feeder
You have the choice between:
• waiting until the transmission takes place at the given time
Current time- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FRI 11 SEP 20:13
Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0142685014 20:18