TA Triumph-Adler CLP 4416 - Manual (Page 82)

5-2
Operation
From the flat scanner
S
ELECTING
C
OLOUR
/R
ESOLUTION
/C
ONTRAST
Selecting black-and-white or colour
Black and white or colour mode is selected by pressing the key.
Note: Before sending colour documents, check that the fax terminal of your correspondent is colour-compatible.
Resolution
You have several scan modes available to send your documents.
The choice of the mode depends on the document to be sent:
• Normal mode, , is to be used for good-quality documents without drawings or small details,
• Fine mode, , below the display screen, is to be used for documents that include drawings or
small characters,
• Super Fine mode, , below the display screen, is to be used for documents that include
drawings (with very thin lines) or very small-size characters (on condition that the receiving fax
can reproduce them),
• Photo mode, , below the display screen, is to be used for photographic documents (except
those in colour).
To select the resolution mode:
+ Press key as many times as necessary to select the required mode. An icon on the screen
shows the current mode.
+ Using the handle, lift up the document
feeder tray.
+ Put your document, with the printed face
down on the scanner window. The
scanner origin is located at your end, to
the left, as shown opposite.
+ Once the operation is complete, lift the
document feeder tray and recover your
document.
Scanner origin