TA Triumph-Adler DC 2042 - Manual (Page 17)

* The types of special paper and the number of sheets which can be loaded in this
tray are:
• Tracing paper: 1 sheet
• Transparencies: 25 sheets (When set transparency, fan transparencies before
setting them.)
• Letterheads: 100 sheets
• Colored paper: 100 sheets
• Standard paper (120 g/m
2 , 160 g/m 2 ): 25 sheets
* When copying onto tracing paper or transparencies, set the original on the platen.
13
PREPARATIONS
1. Open the stack bypass tray.
* To load A4 (vertical) or larger size paper, pull out the support guide.
2. Adjust the insert guides to fit the size of the paper to be loaded.
3. Insert the paper all the way in, along the guides, as far as it will go.
* When loading paper into the multi-bypass, make sure the copy side is facing
upward. (The copy side is the side facing upward when the package is
opened.)
● Setting the envelops in the stack bypass tray
When using the optional printer function, the envelops can be set in the stack
bypass tray.
The types of the envelop can be used are COM-10, Monarch, DL and C5, and up
to 10 envelops can be set at a time.
1. Open the stack bypass tray.
03/2AC-E/11-18.q 2/18/00 10:57 Page 13