Eiki XGA Diamond Series LC-XD25 - Manual (Page 23)

2
Basic Operation
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Lever to adjust the projected picture
focus.
Zoom and Focus Adjustment
Zoom Lever
(Rear)
Focus Lever
(Front)
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control,
correct the image manually as follows:
Press the KEYSTONE button on the remote control. The
keystone dialog box appears.
Correct keystone distortion by pressing the Point
ed
buttons. Keystone adjustment can be memorized. (p.47)
Reduce the upper width
with Point e button.
Reduce the lower width
with Point d button.
Keystone Correction
• T h e a r r ow s a r e w h i t e w h e n t h e r e i s n o
correction.
• The direction of the arrow being corrected turns
red.
• T h e a r r ow s d i s a p p e a r a t t h e m a x i m u m
correction.
• If you press the KEYSTONE button on the
remote control once more while the keystone
dialog box is being displayed, the keystone
adjustment is canceled.
• The adjustable range is limited depending
on the input signal.
Remote Control
Top Control
KEySTONE button
POINT ed buttons
POINT ed buttons
Auto setup function is provided to automatically execute
the setting of Auto setup (includes Input search, Auto PC
adj. and Auto Keystone functions) in the setting menu by
just pressing the AUTO SETUP button on the top control.
Refer to page 46 for the setting of the Auto setup function.
Auto setup function
Top Control
AUTO SETUP button