Eiki XGA Diamond Series LC-XD25 - Manual (Page 59)

5
Maintenance and Cleaning Maintenance and Cleaning
Cleaning the Projector Cabinet
Softly wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with a soft, dry cleaning cloth.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvent, or other harsh chemicals might
scratch the surface.
Follow these steps to clean the projector cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
Cleaning the Projection Lens
Disconnect the AC power cord before cleaning.
When the projector is not in use, replace the lens
cover.
Follow these steps to clean the projection lens.
Softly wipe the projection lens with a cleaning
cloth that contains a small amount of non-abrasive
camera lens cleaner, or use lens cleaning paper or
a commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvent, or other harsh chemicals might
scratch the surface.
1
2
3
1
2
3
Disconnect the AC power cord before cleaning.