Amprobe AT-7000 - Manual (Page 32)

28
5. maintenance
Changing battery for transmitter:
The battery compartment on the back of the AT-7000-T is designed to make it easy for
the user to change the battery. A screw is added to secure the battery in case the unit is
dropped. The 7.2V BR-7000-T Signal Booster Rechargeable Battery Pack or 6 AA alkaline
batteries may be used. The BR-7000-T does not need to be removed to charge. It will begin
recharging whenever the AT-7000-T is plugged into an energized outlet (90V-270V).
OR
BR-7000-T
Figure 5.1: Changing transmitter battery