Avago Technologies AcceleRAID 170LP - Manual (Page 20)

User-supplied Items
1-6 AcceleRAID 170LP Installation Guide
User-supplied Items
The following user-supplied items are required to perform this installation:
• IBM-PC™ compatible host system with PCI 2.2 compliant slot
• Network operating system software (as required)
• SCSI cables to connect the controller and disk arrays (when used in a
2U chassis server, a low profile cable connector may be required)
1
• Static grounding strap or electrostatic discharge (ESD) safe work area
• Disk array enclosure (or equivalent) with SCSI disk drives
1. It is recommended that you use an Amphenol® Fast 40 LVD,
round cable and a Hitachi ® twisted pair, flat cable.