Avago Technologies AcceleRAID 170LP - Manual (Page 21)

Manual No. DB11-000024-00 2-1
Chapter 2
Installation
This chapter describes:
• Before You Begin
• Safety Considerations
• Installation Checklist
• Connectors, LEDs, Jumpers
• Installation Process
• SCSI Termination
• Setting SCSI Device IDs
• SCSI Cabling
• Limitations on Mixing SCSI Drives
Mylex disk array controllers are designed to work in a variety of SCSI RAID
application environments. Certain configuration steps need to be performed
prior to installing the controller into a RAID environment. Each of the steps
described in this chapter is part of the installation process.