Avago Technologies LSI SAS 3041E-R - Manual (Page 66)

3-26 UNIX Operating System Device Drivers
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
m. Type q and press Enter to terminate the CD-ROM Configuration
Program menu.
n. When you are prompted to create a new kernel, type y and
proceed to step
13 if this is the last device to add. Type n and
return to step 10 if you want to add more devices.
13. To rebuild the kernel, type the following on the command line:
/etc/conf/cf.d/link_unix
The following prompt appears:
Do you want this kernel to boot by default (y/n)?
14. Type y and press Enter. The system backs up the old kernel.
The following prompt appears:
Do you want the kernel environment rebuilt (y/n)?
15. Type y and press Enter.
16. Reboot the system by typing reboot and pressing Enter.
17. After the system reboots and the boot: prompt appears, press Enter
to load the new kernel.
18. Log in as usual.
3.4.6 Troubleshooting
The following conditions should exist after a successful installation:
•
The directory etc/conf/sdevice.d should contain a file named
lsil . This file contains the sdevice entries.
•
The directory etc/conf/cf.d should contain the files sdevice ,
mdevice , and mscsi . Files sdev.hdr and mdev.hdr describe the
values of the possible field entries in the files sdevice and mdevice ,
respectively.
•
The sdevice file should contain an lsil entry for each LSI host
adapter configured in the system.
•
The second field in the sdevice file should read Y.
•
An lsil entry should appear in the mdevice file.
•
An lsil entry for each configured device should appear in the mscsi
file.