1 driver features, Driver features – Avago Technologies LSI SAS 3041E-R User Manual

Page 80

Advertising
background image

4-2

NetWare Drivers

Version 1.3

Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.

4.1.1

Driver Features

The MPT HAM driver supports these features:

•

Multiple host adapters

•

Multiple logical unit numbers (LUNS)

•

Large LUN support (larger than 7.844 Gigabytes)

•

SCSI Fibre Channel protocol.

•

Disconnect/Reselect

•

Tagged command queuing

•

Simple and ordered queue tags

•

Scatter/Gather

•

Shared interrupts

•

MPT 5.xx BIOS (with ASPIMPT.SYS version 5.02 or greater)

•

MPT 5.xx BIOS (without ASPIMPT.SYS)

•

MPT 5.xx DOS drivers

The following features are supported for parallel SCSI devices only:

•

Data Transfers at up to Ultra320 SCSI speeds

•

Domain Validation

•

Synchronous negotiation (Fast/Ultra/Ultra2/Ultra160/Ultra320 SCSI)

•

Wide SCSI (single-ended and differential)

The following features are supported in conjunction with Novell software:

•

MPI IOCTL Interface for NetWare using the LSICFGNW.NLM utility
driver.

•

Support for SCSI CD-ROM devices via NetWare’s SCSICD.CDM

•

Support for tape and ASPI devices by using NetWare’s
NWTAPE.CDM for NetWare versions 5.1 and 6.0.

In addition to the Release Definitions, the following restrictions apply:

•

NWPA.NLM must be version 3.12 (or higher) for NetWare 6.0, or
version 3.09 (or higher) for Netware 5.1 or newer in SMP
environments.

Advertising