PLANET FGSW-2620CS - Manual (Page 2)

After entering the user name and password, the Web main
screen appears as Figure 5-2.
Figure 5-2. Web Main Screen of FGSW-2620CS
Now, you can use the Web management interface to
continue the Switch management, please refer to the user
manual for more.
Note
For security reason, please change and
memorize the new password after this first
setup.
6. While IP Address be changed or
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” and the use name / password to factory
default mode (default user name and password is admin).
Press the hardware reset button at the front panel about
5 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of
192.168.0.xx and default user name / password.
18 20 22 24
RESET PWR 17 19 21 23 1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
FGSW-2620CS
ACT LNK
Hardware Reset
7. Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site first to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]
Copyright © PLANET Technology Corp. 2011.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective
owners.