PLANET FSD-1605 - Manual (Page 8)


Power Notice:
1. The device is a power-required device, it means, it will not work till it is
powered. If your networks should active all the time, please consider
using UPS (Uninterrupted Power Supply) for your device. It will prevent
you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to
protect your Switch from being damaged by unregulated surge or current
to the Switch or the power adapter.
2.2 Installing the Switch
This part describes how to install your Fast Ethernet Switch and make
connections to it. Please read the following topics and perform the procedures
in the order being presented.
Note: This Fast Ethernet Switch does not need software configuration.
2.2.1 Desktop Installation
To install the Fast Ethernet Switch on desktop, simply follow the next steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the Fast
Ethernet Switch, as shown in Figure 2-4.
Figure 2-4 Attaching the rubber feet to the Fast Ethernet Switch
Step2: Place the Fast Ethernet Switch on desktop near an AC power
source.
Step3: Keep enough ventilation space between the Fast Ethernet Switch and
the surrounding objects.
Note: When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 1.4 Product Specification.