PLANET FSD-504HP - Manual (Page 2)

- 9 -
- 10 - - 12 - - 13 -
- 11 -
Note
Cable distance for Switch
The cable distance between the FSD-504HP
and PC / PD devices should not exceed 100
meters for UTP/STP cable.
Note
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10
Mbps operation. To reliably operate your
network at 100Mbps, you must use an Un-
shielded Twisted-Pair (UTP) Category 5/5e
cable, or better data grade cabling. While a
Category 3 or 4 cable may initially seem to
work, it will soon cause data loss.
Step 6: Supply power to the Fast Ethernet High Power
PoE Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a
standard wall outlet.
When the Switch receives power, the Power LED should
remain solid Green.
Power Requirements DC 56V, 1.5A.
Power Consumption Max.62 watts / 211.5 BTU
Dimensions
(W x D x H)
90 x 80 x 21mm
Weight 172g
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet
/ PSE
IEEE 802.3at Power over Ethernet
Plus / PSE
PoE Power Supply
Type
Mid-Span
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Output
Per Port 56V DC, 300mA. Max.
15.4 watts (IEEE 802.3af)
Per Port 56V DC, 600mA. Max. 30
watts (IEEE 802.3at)
PoE Power Budget 60 watts
Number of 802.3af PD
Class 0, 1, 2, 3 can
be powered
4
Number of 802.3at PD
Class 1, 2, 3 can be
powered
4
7. Product Specifications
Model
FSD-504HP
4-Port 10/100Mbps 802.3af / at
PoE + 1-Port 10/100Mbps Desktop
Switch
Hardware Specifications
Network Connector
5-Port RJ-45 for 10/100Base-TX,
auto MDI / MDIX
PoE Inject Port
4-Port with 802.3af / at PoE
injector function (Port 2 to port 5)
LED Display
System: Power (Green)
Per PoE port: PoE (Orange, port
2 to port 5)
LNK/ACT (Green, port 1 to port 5)
Switch Architecture
Store and Forward switch
architecture
MAC Address Table
1K MAC address table with Auto
learning function
Switch Fabric 1Gbps
Switch Throughput 0.74Mpps @64Bytes
Maximum Packet Size 1536Bytes
Flow Control
Back pressure for Half-Duplex.
IEEE 802.3x Pause Frame for Full-
Duplex
Number of 802.3at
PD Class 0, 4 can be
powered
2
Standard Conformance
EMI Safety
FCC Class A, CE
Standard Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Ethernet
Fast Ethernet
Flow Control
Power over
Ethernet
High Power over
Ethernet
Environment
Operating
Environment
0 ~ 50 degrees C
Storage Environment -10 ~ 70 degrees C
Operating Humidity
5 ~ 95%, relative humidity, non-
condensing
Storage Humidity
5 ~ 95%, relative humidity, non-
condensing
8. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource on PLANET Website
first to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[email protected]
Copyright © PLANET Technology Corp. 2014.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
EC Declaration of Conformity
For the following equipment:
*Type of Product: 4-Port 10/100Mbps 802.3af/at PoE + 1-Port 10/100Mbps Desktop Switch
*Model Number: FSD-504HP
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.)
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN55022 (2010 + AC:2011)
EN 61000-3-2 (2006 + A1:2009 + A2:2009)
EN 61000-3-3 (2008)
EN55024 (2010)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2010)
IEC 61000-4-4 (2012)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-8 (2009)
IEC 61000-4-11 (2004)
EN60950-1 (2006 + A11:2009 + A1:2010 +
A12:2011)
Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name:
Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname
Kent Kang
Position / Title : Product Manager
Taiwan 15 th Nov., 2013
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: [email protected] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528