Appendix a networking connection, A.2 10/100mbps, 10/100base-tx, A.1 poe rj-45 port pin assignments (end-span) – PLANET FSD-808P User Manual
Page 20
20
Appendix A Networking Connection
A.1 PoE RJ-45 Port Pin Assignments (End-Span)
1 2 3 4 5 6 7 8
PIN NO
RJ45 POWER ASSIGNEMNT
1
z
Power +
2
z
Power +
3
z
Power -
6
z
Power -
A.2 10/100Mbps, 10/100BASE-TX
When connecting the Switch to another Fast Ethernet switch, a straight-through or
crossover cable might be necessary. Each port of the Switch supports auto-MDI/
MDI-X detection. That means you can directly connect the Switch to any Ethernet
devices without making a crossover cable. The following table and diagram show
the standard RJ45 receptacle/ connector and their pin assignments:
RJ45 Connector Pin Assignment
Contact
MDI
Media Dependent Interface
MDI-X
Media Dependent Interface-Cross
1
Tx + (transmit)
Rx + (receive)
2
Tx – (transmit)
Rx – (receive)
3
Rx + (receive)
Tx + (transmit)
4, 5
Not used
6
Rx – (receive)
Tx – (transmit)
7, 8
Not used