PLANET GS-4210-24P2S - Manual (Page 8)

8
 Configuration of the IP address
3. On “GS-4210-24P2S#” prompt, enter “configure”.
4. On “GS-4210-24P2S (config)#” prompt, enter the following command and
press <Enter> as shown in Figure 5-2.
GS-4210-24P2S (config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210-24P2S (config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the PoE Managed
Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2: Setting IP Address Screen
5. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the PoE Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of PoE Managed
Switch through the new IP address.
Note
If you are not familiar with console command or the related param-
eter, enter “?” anytime in console to get the help description.