PLANET GS-4210-24P4C User Manual
Page 8
8
Configuring IP address
3. At the “GS-4210 Series#” prompt, enter “configure”.
4. At the “GS-4210 Series(config)#” prompt, enter the following command and
press <Enter> as shown in Figure 5-2.
GS-4210 Series(config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210 Series(config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2: IP Address Screen
5. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the GS-4210
Managed Switch Series through the new IP address.
Note
If you are not familiar with console command or the related param-
eter, enter “?” anytime in console to get the help description.