PLANET GSD-803PD User Manual

Package contents, Switch front panel, Switch rear panel

Advertising
background image

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check the following contents of your package:

Gigabit Ethernet PoE PD Switch x 1

User's Manual x 1

Rubber Feet x 4

If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.

3. Switch Front Panel

Figure 3-1 shows the front panel of GSD-803PD.

GSD-803PD

PWR

1000

1

2

3

4

5

6

7

8

PoE PD

LNK ACT

8-Port Gigabit Ethernet Switch

10/100

LNK ACT

Figure 3-1: GSD-803PD Front Panel

Step 4: Connect your Gigabit Ethernet PoE PD Switch to

network devices.

A. Connect one end of a standard network

cable to the 10/100/1000Mbps RJ-45 ports
on the Back of the Gigabit Ethernet PoE PD
Switch.

B. Connect the other end of the cable to the

network devices such as printer servers,
workstations or routers..

Step 5: Supply power to the Gigabit Ethernet PoE PD

Switch.

A. Connect one end of the RJ-45 UTP cable

from 802.3af PoE PSE devices to the port 8
of Gigabit Ethernet PoE PD Switch.

When the Gigabit Ethernet PoE PD Switch receives
power, the Power LED should remain solid Green.

5. Switch Rear Panel

Figure 5-1 shows the rear panel of GSD-803PD.

5V DC

1

3

5

7

4

6

8

PoE PD

2

ON
OFF

Figure 5-1: GSD-803PD Rear Panel

Power

Notice

1. The Gigabit Ethernet PoE PD Switch

supports two power systems, DC 5V or
powered from PoE Port # 8 that supports
802.3af PoE 48V DC in-line power.

2. The default package of Gigabit Ethernet

PoE PD Switch does not include DC 5V
power adapter. If you need this DC 5V
power adapter, please contact your local
dealer or distributor for more assistance.

2. Product Features

Complies with IEEE 802.3 10Base-T, IEEE 802.3u

100Base-TX, IEEE 802.3ab 1000Base-T Ethernet
standard

8-Port 10/100/1000Mbps Gigabit Ethernet Ports

Features Store-and-Forward mode with wire-speed

filtering and forwarding rates

Hardware based 10/100Mbps, half / full duplex and

1000Mbps full duplex mode, flow control and auto-
negotiation

IEEE 802.3x flow control for full duplex operation and

back-pressure for half duplex operation

Integrated address look-up engine, support 8K

absolute MAC addresses

One power on/off button for energy saving

Automatic address learning and address aging

9K Jumbo packet size

Supports Auto MDI/MDI-X function

Support CSMA/CD protocol

1-Port support 802.3af PoE DC 48V in-line power at

Port 8

FCC, CE class A compliant

4. LED Indicators

System

LED Color

Function

PWR Green

Light to indicate that the Switch has
power.

Per 10/100/1000Base-T RJ-45 Port

LED

Color

Function

1000

LNK/ACT

Orange

Light to indicate that the Switch

is successfully connecting to
the network at 1000Mbps.

Blink to indicate that the Switch is

actively sending or receiving
data over that port.

10/100

LNK/ACT

Green

Light to indicate that the Switch

is successfully connecting to
the network at 10/100Mbps.

Blink to indicate that the Switch is

actively sending or receiving
data over that port.

7. Product Specifications

Product

GSD-803PD

Hardware Specifications
10/100/1000Base-T
Ports

8 Auto MDI/MDIX ports

Enclosure

Metal

LED Indication

System: Power (Green)
Per Port: 1000 LNK/ACT (Orange)
10/100 LNK/ACT (Green)

Dimensions
(W x D x H)

155 mm x 86 mm x 26 mm

Weight

378g

Power
Requirements

802.3af PoE 48V DC in-line power
DC 5V power adapter (Not
include in standard package)

Power Consumption
/ Dissipation

3.3 watts / 11 BTU

Switch Specifications
Switch Processing
Scheme

Store-and-Forward

MAC Address Table 8K entries

Flow Control

Back pressure for Half Duplex
IEEE 802.3x Pause Frame for Full
Duplex

6. Installing the Switch

This part describes how to install your Gigabit Ethernet
PoE PD Switch and make connections to it. Please
read the following topics and follow the procedures as
presented.

Note

This Gigabit Ethernet PoE PD Switch does
not need software configuration.

Desktop Installation

To install the Gigabit Ethernet PoE PD Switch on
desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas

on the bottom of the Gigabit Ethernet PoE PD
Switch.

Step 2: Place the Gigabit Ethernet PoE PD Switch on

desktop near an 802.3af PoE PSE device.

Step 3: Keep enough ventilation space between the

Gigabit Ethernet PoE PD Switch and the
surrounding objects.

Note

When choosing a location, please keep
in mind the environmental restrictions
discussed in Chapter 7 -- Product
Specifications.

Advertising