PLANET GSD-805 - Manual (Page 13)

13
Power
Notice
1. The device is a power-required device, it
means, it will not work till it is powered. If
your networks should active all the time,
please consider using UPS (Uninterrupted
Power Supply) for your device. It will prevent
you from network data loss or network down-
time.
2. In some area, installing a surge suppression
device may also help to protect your Switch
from being damaged by unregulated surge or
current to the Switch or the power adapter.
2.2 Installing the Switch
This part describes how to install your Gigabit Ethernet Switch
and make connections to it. Please read the following topics and
perform the procedures in the order being presented.
Note
This Gigabit Ethernet Switch does not need soft-
ware configuration.
2.2.1 Desktop Installation
To install the Gigabit Ethernet Switch on desktop, simply follow
the next steps:
Step 1: Attach the rubber feet to the recessed areas on the
bottom of the Gigabit Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on desktop near an
AC power source.
Step 3: Keep enough ventilation space between the Gigabit
Ethernet Switch and the surrounding objects.