4 power over ethernet powered device – PLANET GSD-808HP User Manual

Page 16

Advertising
background image

16

3.4 Power over Ethernet Powered Device

3~5 Watts

Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where
UPS is installed for un-interrupt power system and power
control system.

6~12 Watts

Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where with no
hesitation.

10~12 Watts

IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP
Camera without limits of install location – no need electri-
cian to install AC sockets.

3~12 Watts

PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable
into 5/12V DC power output. It frees the device deploy-
ment from restrictions due to power outlet locations, which
eliminate the costs for additional AC wiring and reduces
the installation time.

30 Watts

High Power Speed Dome
This state-of-the-art design is considerable to fit in various
network environments like traffic centers, shopping malls,
railway stations, warehouses, airports, and production facil-
ities for the most demanding outdoor surveillance applica-
tions- no need electrician to install AC sockets.

Note

Since the GSD-808HP per PoE port supports 52V DC PoE power
output, please check and assure the Powered Device (PD) accept-
able DC power range is from 52V DC. Otherwise, it will damage the
Powered Device (PD).

Advertising