PLANET GSW-1601 - Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Content
Thank you for purchasing PLANET 16/24-Port
10/100/1000Mbps unmanaged Gigabit Ethernet Switch,
GSW-1601 / GSW-2401. Terms of “Switch” in following
section of this User’s Manual means the GSW-1601 /
GSW-2401.
Upon open the box of the Switch and carefully unpack it.
The box should contain the following items:
 The Gigabit Ethernet Switch x 1
 User’s Manual x 1
 Power Cord x 1
 Rubber Feet x 4
 Two Rack-Mounting Brackets with Attachment Screws x 1
If any of these are missing or damaged, please contact your
dealer immediately, if possible, retain the carton including
the original packing material, and use them against to
repack the product in case there is a need to return it to us
for repair.
3. Product Specification
Product GSW-1601 GSW-2401
Hardware Specification
Hardware Version
5
10/100/1000Base-T MDI/
MDIX Ports
16 24
Throughput
(packet per second)
23.8Mpps 35.7Mpps
Switch Fabric 32Gbps 48Gbps
Weight 1.9kg 2kg
Power Consumption /
Dissipation 13 Watts /
44 BTU 18 Watts /
61 BTU
Power Requirement 100~240V AC, 0.6A, 50-60Hz
Dimensions (W x D x H) 440 x 180 x 44mm, 1U height
Switch Processing
Scheme
Store-and-Forward
Address Table 8K entries
Jumbo Packet Size 9K
Flow Control
Back pressure for half duplex,
IEEE 802.3x Pause Frame for
full duplex
Temperature
Operating: 0~50 Degree C
Storage: -40~70 Degree C
5. Switch Rear Panel
Figure 3 shows a rear panel of Gigabit Ethernet Switch.
Figure 3: GSW-1601 / GSW-2401 Rear Panel
Power
Notice
1. The device is a power-required device, it
means, it will not work till it is powered. If
your networks should active all the time,
please consider using UPS (Uninterrupted
Power Supply) for your device. It will
prevent you from network data loss or
network downtime.
2. In some area, installing a surge suppression
device may also help to protect your Gigabit
Ethernet Switch from being damaged by
unregulated surge or current to the Switch
or the power adapter.
4. Switch Front Panel
Figure 1 & 2 shows a front panel of Gigabit Ethernet
Switch.
GSW-1601
16-Port Gigabit Ethernet Switch
9 11 13 15 1 3 5 7
10 12 14 16 4 6 8 2
2
PWR
4 6 8 10 12 14 16 LNK/ACT 1000 LNK/ACT 1000 1 3 5 7 9 11 13 15
ACT LNK
1000 10/100
Figure 1: GSW-1601 Front Panel
9 11 13 15 1 3 5 7
10 12 14 16
17 19 21 23
18 20 22 24 4 6 8 2
GSW-2401
24-Port Gigabit Ethernet Switch
2
PWR
4 6 8 10 12 14 18 LNK/ACT
1000
1 3 5 7 11 9 13 17
16
15
20
19
22
21
24
23 LNK/ACT 1000
ACT LNK
1000 10/100
Figure 2: GSW-2401 Front Panel
2. Product Features
 Comply with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-
TX, IEEE 802.3ab 1000Base-T Ethernet standard
 16 / 24-Port 10/100/1000Mbps Gigabit Ethernet ports
 Features Store-and-Forward mode with wire-speed
filtering and forwarding rates
 Hardware based 10/100Mbps, half / full duplex and
1000Mbps full duplex mode, flow control and auto-
negotiation
 IEEE 802.3x flow control for full duplex operation and
Backpressure for half duplex operation
 Integrated address look-up engine, support 8K absolute
MAC addresses
 9K Jumbo packet support
 IEEE 802.1Q VLAN packet transparent support
 Automatic address learning and address aging
 Supports Auto MDI/MDI-X function
 Support CSMA/CD protocol
 100~240V AC, 0.6A, 50~60Hz universal Power input
 FCC, CE class A compliant
Humidity:
Operating: 5% to 95%
(Non-condensing)
Storage: 5% to 95%
(Non-condensing)
Standards Conformance
Regulation Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab (Gigabit
Ethernet)
IEEE 802.3x (Full-Duplex Flow
Control)
LED Indicators
GSW-1601 / GSW-2401
System
LED Color Function
PWR Green
Lights to indicate that the Switch has
power.
Per 10/100/1000Mbps port
LED Color Function
LNK /
ACT
Green
Lights to indicate the link through that
port is established successfully.
Blinks indicate that the Switch is
actively sending or receiving data over
that port.
1000 Green
Lights to indicate the port is run at
1000Mbps.
Off: indicate that the port is operating
at 10/100Mbps.
6. Installing the Switch
This part describes how to install your Gigabit Ethernet
Switch and make connections to it. Please read the
following topics and perform the procedures in the order
being presented.
Note
This Gigabit Ethernet Switch does not need
software configuration.
Desktop Installation
To install the Gigabit Ethernet Switch on desktop, simply
follow the next steps:
Step 1: Attach the rubber feet to the recessed areas on
the bottom of the Gigabit Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on desktop near
an AC power source.
Step 3: Keep enough ventilation space between the Gigabit
Ethernet Switch and the surrounding objects.
Note
When choosing a location, please keep in mind
the environmental restrictions discussed in
Section 3 Product Specifications.