PLANET LRP-822CS - Manual (Page 12)

12
8. Starting Long Reach PoE Communication
The following shows how to start up the Long Reach PoE Communication of the
LRP Managed Switch from Web Management.
Note
The LRP Managed Switch is configured DISABLED Long Reach PoE
function as default.
 Connect the Coaxial Cable
1. Insert the coaxial cable with one side being the 75ΩBNC plug connector into the
Long Reach Ethernet coaxial interface.
2. Connect the other end of the cable to a device with Long Reach Ethernet
coaxial extender installed.
3. Tight the BNC male connector gently.
5C2V/RG6 75Ω Coaxial Cable
RJ45
PoE PT Camera
Long Reach Power over Ethernet 2
1
LRP-822CS LRP-101CE