PLANET XGS3-24042 - Manual (Page 12)

12
9. Set 100Base-FX for SFP Port
The XGS3 Managed Switch supports both 1000Base-X and 100Base-FX SFP
transceiver by manual setting and the default SFP port speed is set to 1000Mbps.
To establish the fiber connection with 100Base-FX SFP transceiver, the following
command configuration is required:
XGS3-24042#config
XGS3-24042(config)#interface ethernet 1/0/21-24
XGS3-24042(config-if-port-range)#speed-duplex force100-fx
Figure 9-1 Set 100Base-FX screen