PLANET HPOE-1200G - Manual (Page 2)

– 5 – – 6 –
4. While IP Address be changed or
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” and the user name / password to factory
default mode by press the hardware reset button about 8
seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of
192.168.0.xx and default user name / password.
1
PoE In-Use 1
HPOE-2400G
RESET
PoE 1
Fail
FAN1
Fail
PoE 2
Fail
FAN2
Fail
SYS PWR
Management
Hardware
Reset button
5. Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site first to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address:
[email protected]
Copyright © PLANET Technology Corp. 2011.
Contents subjects to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.