PLANET HPOE-460 - Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Introduction
1.1 Checklist
Thank you for purchasing our HPOE-460 4-Port Gigabit
IEEE 802.3at High Power over Ethernet Injector Hub,
the High Power over Ethernet Injector Hub package shall
contains following contents:
Check the contents of your package for following
parts:
 High Power over Ethernet Injector Hub x 1
 User's Manual x 1
 Power Adapter x 1
 Power Cord x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use
them against to repack the product in case there is a
need to return it to us for repair.
1.3 Features
8-Port RJ-45
 4-Port 10/100/1000Mbps “Data input”
 4-Port 10/100/1000Mbps “Data + Power output”
Power over Ethernet
 IEEE 802.3at and IEEE 802.3af Power over Ethernet
Mid-Span PSE
 Up to 4 IEEE 802.3at / 802.3af devices powered
 DC 52V power over RJ-45 Ethernet cable to devices
with Ethernet port
 PoE power up to 30.8 Watts (802.3at PoE) / 15.4
Watts (802.3af PoE) for each PoE ports
 Remote power feeding up to 100m
 Full power support for per PoE port
 Automatically detect powered device (PD)
 Circuit protection prevents power interference
between ports
1.5 Product Outlook
1
2
3
4
4-Port High Power PoE Injector Hub IEEE 802.3at
52V~56V DC
PWR 1 2 3
PoE in-Use
4
1
2
3
4
DATA & PWR
Remove “DATA & PWR” Connection before power on.
CAUTION
DATA
LED Definition:
LED Color Function
Power Green
Lights to indicate that the
HPOE-460 has power.
PoE Ready /
In-Use
Green
Lights to indicate the port is
providing 52V DC in-line power.
1.4 Specification
Product HPOE-460
Hardware
Interface
“Data” Input Ports 4 x RJ-45
“Data+Power”
Output Ports
4 x RJ-45
Data Rate 10/100/1000Mbps
LED
System: Power x 1 (Green)
Per PoE Port: PoE ready /
in-use x 4 (Green)
Network Cable
10Base-T: 2-Pair UTP Cat. 5
up to 100m (328ft)
100Base-TX: 2-Pair UTP
Cat. 5 up to 100m (328ft)
1000Base-T: 4-Pair UTP Cat.
5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP
(100m, 328ft)
Dimension (H x W x D) 26 x 70 x 97mm
Weight 220g
Power Requirement DC 52V~56V
Power over Ethernet
PoE Power Supply Type
Mid-Span
PoE Power Output
IEEE 802.3af Per Port DC
52V 15.4 Watts
IEEE 802.3at Per Port DC
52V 30.8 Watts
1.2 About the Power over Ethernet Injector
Hub
The PLANET HPOE-460 is the next generation 4-Port
Gigabit IEEE 802.3at High Power PoE injector Hub,
features both IEEE 802.3af and High Power IEEE
802.3at Power over Ethernet (PoE) that combines up
to 30 Watts power output and data per port over one
CAT 5E / 6 Ethernet cable. It is designed specifically to
satisfy the growing demand of higher power consuming
network PD (powered devices) such as PTZ (Pan, Tilt &
Zoom) / Speed Dome network cameras, multi-channel
(802.11a/b/g/n) wireless LAN access points and other
network devices by providing double amount of PoE
power than conventional 802.3af PoE PSE.
The HPOE-460 is installed between a regular Ethernet
Switch and the powered devices; it injects power to the
PDs without affecting data transmission performance.
It offers a cost effective and quick solution to upgrade
network system to IEEE 802.3af / IEEE 802.3at Power
over Ethernet system without replacing the existing
Ethernet Switch. There are 8 RJ-45 STP ports on the
front panel of the HPOE-460, half of the ports on right
panel function as “Data input" and the other half
on left panel function as "PoE (Data and Power)
output". The 4 "PoE (Data and Power) output”
ports are also the power injectors that transmit DC
voltage to the CAT. 5/5e/6 cable and transfer data
and power simultaneously between the Injectors and
Splitters.
Hardware
 Desktop palm size, wall mountable
 LED indicator power input indication
 FCC Part 15 Class B, CE
 100~240V AC, 50/60Hz, 2A universal power supply
adapter with DC 52V / 2.31A power output
 Plug & play
Standard Compliance
 IEEE 802.3 10Base-T
 IEEE 802.3u 100Base-TX
 IEEE 802.3ab 1000Base-T
 IEEE 802.3af Power over Ethernet
 IEEE 802.3at Power over Ethernet Enhancement
2. Hardware Installation
This product provides three different running speeds –
10Mbps, 100Mbps and 1000Mbps in the same device
and automatically distinguishes the speed of incoming
connection.
This section describes the hardware features of HPOE-
460. Before connecting any network device to the HPOE-
460, read this chapter carefully.
2.1. Before Installation
Before your installation, it is recommended to check
your network environment. If there has any IEEE
802.3af / 802.3at device which needs power on, the
HPOE-460 provides you a way to supply power for this
Ethernet device conveniently and easily. The HPOE-460
equips with an AC-DC adapter with DC 52V input and
injects this DC power into the pin of the twisted pair
cable (pair 4, 5 and pair 7, 8).
If there is very difficult to find a power socket for AC-DC
Adapter of your Non-IEEE 802.3af / 802.3at networked
device, the HPOE-460 and POE-162S / IPOE-162S can
provide you a way to supply DC power for this Ethernet
device conveniently and easily.
The 10Mbps or 100Mbps and 1000Mbps speed, duplex
mode from Data port of HPOE-460 depends on which
Ethernet device attached.
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 120 Watts
Number of 802.3af PD Class
0, 1, 2, 3 can be powered
4
Number of 802.3at PD Class
1, 2, 3 can be powered
4
Number of 802.3at PD Class
0, 4 can be powered
4
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T
Ethernet
IEEE 802.3u 100Base-TX
Fast Ethernet
IEEE 802.3ab 1000Base-T
Gigabit Ethernet
IEEE 802.3af Power over
Ethernet
IEEE 802.3at Power over
Ethernet Enhancement
Regulation Compliance FCC Part 15 Class B, CE
Environment
Operating Temperature
0 ~ 50 Degree C
Storage Temperature -10 ~ 70 Degree C
Humidity 5 ~ 95% (Non-condensing)